Book a Car

Tips to Repair Rust on a Car

Tips to Repair Rust on a Car

Rust repair

Rust is a terrifying word as the vast majority think it flags the demise of their automobile, yet with fundamental tools and a brief period, you can stop your car from decaying. If left unattended itbecomes unattractive and risky, however, the car can be repaired with the correct items and a touch of efforts.

A dark brown spot on the cover, a bubble in the paint at the rear of a door, suddenly drenched floors after driving through a puddle, are signs of the rust. In this blog, we will discuss about how to repair rust on a car.

Here is a 5-step process on how to fix rust holes on the car:
1. Prepare your tools
2. Evacuate the paint
3. Implement a filler
4. Paint the car
5. Put clear coat

How to repair rust on a car:
Step 1. Prepare your tools
Some necessary tools are required to fix the rust, like:
• Electric drill with sanding disc attachment
• Breathing mask
• Protective goggles
• Hammer
• Paint primer
• Sandpaper
• Paint
• Rust-resistant primer
• Paint primer
• Paint primer
• Grinding wheel

Step 2. Evacuate the Paint
Expel the paint from the rusted part and the encompassing region around 50mm by hand sanding with grit sandpaper or machine. Using a panel hammer, makes sure that every single loose area of rust is expelled from the car.

Step 3. Implement A Filler
Combine the required quantity of fiber filler use ratio of one-part hardener to fifty-part filler to assure the color is visibly constant before continuing. Quickly apply a thin layer to the repair area and slowly apply the leftover filler till it’s mildly higher than the encompassing edge.

Step 4. Paint the Car
When the surface is dust free, smooth, and dry, it is now prepared to be painted. Give the paint time to dry, and then hit the area again with 400-grit sandpaper, considering any thick blemishes of paint. Clean it up, allow the paint to dry, and repeat the steps. Complete with wet sand, utilizing just water and 400-grit sandpaper.

Step 5. Put Clear Coat
Wrap up by putting a clear coat on the cleared area. This ensures the layers of paint that you have added to the vehicle part and gives it a new, shiny look. When applied, it takes time to dry, at that point examine to guarantee there are no rough parts and sand if you see any.

For more tips and car related queries, you can get in touch with Car Ustad. Our team is always there to help and guide you. We always suggest you to take a proper care of your automobile to avoid any unexpected situation and to use it for a longer duration.